Intec K30000-01 Guida di Installazione Scaricare il pdf (Pagina 19)

SIDEWALL TECH NOTES, CONT.

FORCE

/3 3.0 & 4.0 DP

Sidewall Tech Notes, Cont.

CELLULOSE WET SPRAY

Your Force/3 can apply both wall-spray and spray-on materials. There

are many different types of material for these applications and

depending upon the material your results will differ. The Force/3 has

been designed to apply most materials and can recycle up to 50/50

blend of Dry/Wet cellulose material. Using recycled material will change

the speed of the material traveling through the hose and will change

the impact velocity and thus the density of the material being sprayed.

It is recommended that you test a small area of wall section to

determine optimum machine settings before starting a job. Loading of

the hopper can affect the desired wall-spray job, we recommend that

when loading the hopper DO NOT dispense wet material into an

empty hopper!, doing so may clog hose! Dispense wet material on top

of dry material and allow the agitator to blend the materials. Hose

length and nozzle orifice size and design play a key role to a successful

application. Depending on the nozzle you select will determine how to

set up the machine. General guideline for setting your machine up are,

100 feet of 2 or 2-1/2" hose, variable speed setting of 80-100% with the

slide gate 1/4-1/3 open. When using 2 or 2-1/2" hose we recommend

using an insert tube (PN 22049-06) to enhance setup and reduce the

likely hood of clogging the hose. For further information on Cellulose

Wall-Spray or Spray-On applications consult Intec or your local supplier

of material.

FIGURING WALL CAVITY AREA

Measure wall cavity in inches.

Multiply depth x width x height, divide by 1728.

Example: 3-1⁄2" x 14-1⁄2" x 92-5⁄8" = 4700 CI / 1728 = 2.72 cubic feet

(1728 is the number of cubic inches per cubic foot)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 37 38

Nessun commento

Intec K30000-01 Guida di Installazione Pagina 19